Knowledge Management

Question:
Hi
I am facing problem in bin search startegy. The system does not propose the bin at the time of creating TO with ref to TR even though i have set the bin search strategy.
I have set putway strategy as I ( add to existing stock) for the storage type.
System does selects the storage type as i have set the storage type indicator for the material.But does not select storage section( i do have set the strorage section indicator in material master) neither bin.
Suprisingly when i create a new bin ,system automatecally selects that bin but it does not select the existing bin.If i manually specify the existing bin it accepts the same.The log shows for
Determ.destination data
P/R TyInd C S St.Cl WPC Ref WhR
All stor.ty.search param.defined E 001 Q 0 000
Stock placement storage type 002 Putaway strategy I Addition to existing stock
Stock placement storage type 002 Putaway strategy L Empty bin
Section 001 Bin type ** Search unsuccessful
Section 002 Bin type ** Search unsuccessful
System message L3 009
No destination storage bin to be found in storage type 002
Can somebody help me in this regards
Thanking in advance
bye
Rajesh
Answer:
Did you update the material master with new storage type? (MM01)
If you did not update your material master, this could be your problem.
I had the same problem until I updated the material master with new storage type.
then I updated the warehouse view with bin.
Laurie
Answer:
Hi
Thanks for the reply.
I do have Material master updated for the storage type.
Bye
Ninad
Answer:
Hi
The mateial master is maintianed but problem is not yet solved.
Bye
Rajesh
Answer:
In the Material Master Add the Bin in Warehouse 2 view.
Now the Bin should automatically fill in.
Laurie
Answer:
Hi Laurie
Eventhough i have mentoined the storage bin in the material master it does not pick up the bin.
Bye
Rajesh
Answer:
Sorry, I am out of answers.
Laurie
Answer:
I hope I am not on the wrong track, but in my system I have equal values on successful searches for type indicator (you have 001) and Stock placement storage type (you have 002).
check in OMLY if you have setup a strategy for the value you have entered in material master.
Determ.destination data
P/R TyInd C S St.Cl WPC Ref WhR
All stor.ty.search param.defined E 001 Q 0 000
Stock placement storage type 002 Putaway strategy I Addition to existing stock
Stock placement storage type 002 Putaway strategy L Empty bin
Section 001 Bin type ** Search unsuccessful
Section 002 Bin type ** Search unsuccessful
System message L3 009
No destination storage bin to be found in storage type 002
Answer:
Hi
I am getting the same error message L3009.
I have set the storage type for the indicators maintaned in the material master.Infact it get the correct storage type but does not select the strorage bin as well as section.
If i define a new bin then it picks up that automatically but does not select the existing one.
Can you please advise on these.
Bye
Rajesh
Answer:
do you have mixed storage?
is the material batch managed?
Has the desired bin enough capacity?
Answer:
Hi
I do have mixed storage as well as the Material is batch managed & the Bin does have sufficient capacity.
Bye
Rajesh
Answer:
According to SAP help for strategy " I - add to the existing stock",
mixed storage is not allowed.
See
In general SAP switches to strategy NEXT EMPTY BIN if there is not enough capacity available in the bin where this material already is stored.
As you can read in the OSS note392776: capacity check 1, 2 and 3 with mixed storage does not work.
Use 4 instead. define your capacity usage eq to the weight in material master and storage bin.
The capacity check was activated in a storage type by the assignment of a capacity inspection method. The capacity check is still not carried out as required. For example, there is more put away on the storage bin than there should be in accordance with the definition.
Additional key words
V_T3010-KAPAP, T331-KAPAP, LAGP-RKAPV
Cause and prerequisites
This note should describe the functioning of the capacity check by means of an overview. Furthermore, it should also draw your attention to frequent misunderstandings and problem sources.
Solution
Basically a distinction is made for the capacity inspection methods between the check by quant and the check in accordance with neutral key figures.
(A) Capacity check at quant level (Inspection methods 1 - 3)
The inspection methods 1 - 3 generally take place at quant level. In other words these inspection methods can only be used to its intention in storage types in which the mixed storage is not allowed. The reason for this is that the system does not use the entire quantity on the storage bin for the capacity check in the case of a mixed storage, but it is checked separately for every quant whether it exceeds the capacity. Several quants would be created on the bin, for example, in the case of different batches or different stock categories of the same material, and the maximum defined quantity would be allowed for every batch (or stock category).
(B) Capacity check in accordance with neutral key figures (Inspection methods 4 - 6)
These inspection methods require the definition of key figures without dimensions for capacity consumption in the material master or in the storage unit type. You must also have defined a maximum permitted capacity in the storage bin master record.
Description of the individual inspection methods
---------------------------------------
Inspection method 1 - check by maximum weight
The system checks for a putaway or for an addition to existing stock whether the weight of the quant being created on the storage bin exceeds the maximum weight specified in the storage bin master record and the putaway is terminated in this case. The maintenance of the weight data in the material master is a prerequisite. Note that each individual quant on the storage bin is allowed to reach the maximum weight in the case of a mixed storage. Thus a combination with mixed storage is not useful.
Inspection method 2 - check based on palletization according to SUT 1
The maintenance of the palletization data in the Warehouse Management view of the material master is a prerequisite for this inspection method. The quantity specified in the first line of the palletization data is allowed as a maximum for each quant, independent of the used storage unit type. The other palletization data is not taken into account. The mixed storage should also not be allowed in the storage type for this inspection method since it may otherwise be allowed for each quant to reach the maximum quantity.
Inspection method 3 - check based on maximum quantity per bin in the storage type
You can maintain a maximum quantity per storage bin in the storage type data of the material master. For inspection method 3, the Quants of the corresponding material are putaway to a maximum of this quantity. For the above-mentioned reasons, it also applies here that the mixed storage should not be allowed.
Inspection method 4 - check in accordance with material key figure
You can define a neutral capacity consumption relating to a unit of measure in the Warehouse Management view of the material master. You must then have defined a total capacity (also neutral) in the storage bin master data. For the putaway on a storage bin, the remaining capacity of the storage bin is calculated from the total capacity minus the capacity of the putaway materials and saved in the storage bin master record. In the case of other putaways and additions to existing stock, this remaining capacity is used to check whether the putaway is allowed on this bin. This inspection method is also suitable for storage types with mixed storage.
Inspection method 5 - check in accordance with SUT key figure
When you define the storage unit types, you can define a capacity consumption for each storage unit type. During putaway, the system then determines from the total capacity or the remaining capacity of the bin and from the capacity of the storage unit whether a putaway is possible. This inspection method is only useful if several storage units are allowed for each bin. Never use the inspection method 5 in conjunction with the putaway strategy I (addition to existing stock). An addition to existing stock would not generate a new storage unit, but add to an existing storage unit. The capacity consumption would not change in this case.
Inspection method 6 - checks in accordance with material key figures and SUT
This inspection method represents a combination of the inspection methods 4 and 5. The capacity data should be maintained in both the material master and the storage unit type. If a storage unit is putaway on a bin, both the storage unit and the material stored on it consume capacity. The SUT check should be activated in the storage type for this inspection method or the Storage Unit Management for the storage type should be active.
For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.
Answer:
Hi Svetja
Thanks for the reply.
I will check on this. But shall i remove the Mixed storage allowed indicator for the storage type.
Please reply.
Regards
Rajesh
Answer:
Leave the Mixed storage field blank. Mixed storage is not allowed.

Open then on left hand side the Putaway and Picking Strategies,
then open Putaway Strategies,
click then Strategy I: Addition to Existing Stock
to get the full explanation.
Answer:
Hi Svetja
Thanks for the reply. I will check on these.
Bye
Rajesh